Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1140

Related Commands
ip route-map action
ip route-map match ip address
ip route-map match ipv6
address
ip route-map match ip-
nexthop
ip route-map match ipv6-
nexthop
ip route-map match tag
ip route-map match tag
ip route-map match metric
MIB Objects
alaRouteMapRedistProtoTable
alaRouteMapRedistRouteMapIndex
alaRouteMapTable
alaRouteMapIndex
alaRouteMapSequence
alaRouteMapType
alaRouteMapValue
alaRouteMapRowStatus
page 29-92
Creates a route map for redistribution and sets the status of route
map to permit or deny.
Matches the route with the specified IPv4 address or with addresses
contained in an IPv4 access list specified by the access list name.
Matches the route with the specified IPv6 address or with addresses
contained in an IPv6 access list specified by the access list name
Matches the routes that have a next-hop router address permitted
by the specified access list.
Matches the routes that have an IPv6 next-hop router address per-
mitted by the specified access list
Permits or denies a route based on the specified next-hop IP
address.
Matches the tag value specified in the route map with the one that
the routing protocol learned the route on.
Matches the metric value specified in the route map with the one
that the routing protocol learned the route on.
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009