Show Ipv6 Access-List - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 access-list

Displays the contents of the specified IPv6 access list.
show ip access-list [access-list-name]
Syntax Definitions
access-list-name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If the access-list-name is not specified in this command, all the access lists will be displayed.
Examples
-> show ipv6 access-list
Name
--------------------+------------------+-------+--------------
al_3
al_4
-> show ipv6 access-list 4
Name
--------------------+------------------+-------+--------------
al_4
output definitions
Name
Address/Prefix Length
Effect
Redistribution Control
Release History
Release 6.6.1; command was introduced
OmniSwitch 6250 CLI Reference Guide
Name of the IPv6 access list.
Address /
Prefix Length Effect
128::/64 permit
124::/64 permit
Address /
Prefix Length Effect
124::/64 permit
Name of the IPv6 access list.
IPv6 address that belongs to the access list.
Indicates whether the IPv6 address is permitted or denied for redistribu-
tion.
Indicates the conditions specified for redistributing the matched routes.
November 2009
Redistribution
Control
all-subnets
no-subnets
Redistribution
Control
no-subnets
page 30-63