Show Ipv6 Rip Routes - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 rip routes

Displays all or a specific set of routes in RIPng Routing Table.
show ipv6 rip routes [dest <ipv6_prefix/prefix_length>] | [gateway <ipv6_addr>] | [detail <ipv6
prefix/prefix_length>]
Syntax Definitions
dest
gateway
detail
ipv6_addr
ipv6_prefix/prefix length
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not enter one of the optional parameters, all IPv6 RIP routes are displayed.
Examples
-> show ipv6 rip routes
Legends: State: A = Active, H = Holddown, G = Garbage
Destination
---------------+----------------------------+-------+------+------
100::1/128
100::100:1/128
400::/100
900::/100
8900::/100
9800::/100
9900::/100
OmniSwitch 6250 CLI Reference Guide
Displays all routes whose destination matches the IPv6 prefix/prefix
length.
Displays all routes whose gateway matches the specified IPv6 address.
Displays detailed information about a single route matching the speci-
fied destination.
IPv6 address.
IPv6 address and prefix/prefix length.
Gateway
+fe80::200:39ff:fe1f:710c
+fe80::200:39ff:fe1f:710c
+fe80::2d0:95ff:fe12:e050
+fe80::2d0:95ff:fe12:e050
+fe80::2d0:95ff:fe12:da40
+fe80::2d0:95ff:fe12:da40
+fe80::2d0:95ff:fe12:e050
November 2009
State Metric Proto
A 2 Rip
A 2 Rip
A 1 Local
A 1 Local
A 2 Rip
A 2 Rip
A 1 Local
page 30-87