Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1130

output definitions
Subnet Mask
Status
Forward
Device
-> show ip interface Marketing
Interface Name = Marketing
SNMP Interface Index
IP Address
Subnet Mask
Broadcast Address
Device
Encapsulation
Forwarding
Administrative State
Operational State
Operational State Reason
Router MAC
Local Proxy ARP
Maximum Transfer Unit
Primary (config/actual)
output definitions
SNMP Interface Index
IP Address
Subnet Mask
Broadcast Address
Device
Encapsulation
Forwarding
Administrative State
page 29-82
IP subnet mask for the interface IP address. Configured through the
interface command.
Interface status:
•
UP—Interface is ready to pass packets.
•
DOWN—Interface is down.
Indicates whether or not the interface is actively forwarding packets
(YES or NO).
The type of device bound to the interface:
•
unbound—No device is bound to the interface.
•
vlan—The VLAN ID that is bound to the interface.
•
Loopback—A loopback interface is configured for testing.
Configured through the ip interface
= 13600007,
= 172.16.105.10,
= 255.255.0.0,
= 172.16.255.255,
= vlan 200,
= eth2,
= disabled,
= enabled,
= down,
= device-down,
= 00:d0:95:6a:f4:5c,
= disabled,
= 1500,
= no/yes
Interface index.
IP address associated with the interface. Configured through the
ip interface command.
IP subnet mask for the interface. Configured through the
command.
Broadcast address for the interface.
The type of device bound to the interface:
•
unbound—No device is bound to the interface.
•
vlan—The VLAN ID that is bound to the interface.
•
Loopback—A loopback interface is configured for testing.
Configured through the ip interface
Displays the IP router encapsulation (eth2 or snap) that the interface
will use when routing packets. Configured through the
command.
Indicates whether or not IP forwarding is active for the interface
(enabled or disabled). Configured through the
Administrative state of the IP interface (enabled or disabled), which is
independent of the state of the underlying device. Configured through
the ip interface command.
OmniSwitch 6250 CLI Reference Guide
IP Commands
command.
ip interface
command.
ip interface
ip interface command.
November 2009
ip