Show Ipv6 Traffic - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ipv6 traffic

Displays IPv6 traffic statistics.
show ipv6 traffic [if_name]
Syntax Definitions
if_name
Defaults
N/A.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The statistics show the cumulative totals since the last time the switch was powered on, the last reset of the
switch was executed or the traffic statistics were cleared using the command.
Examples
-> show ipv6 traffic
Global IPv6 Statistics
Packets received
Total
Header errors
Too big
No route
Address errors
Unknown protocol
Truncated packets
Local discards
Delivered to users
Reassembly needed
Reassembled
Reassembly failed
Multicast Packets
Packets sent
Forwarded
Generated
Local discards
Fragmented
Fragmentation failed = 0
Fragments generated
Multicast packets
page 30-48
Interface name. Restricts the display to the specified interface instead of
global statistics.
= 598174
= 0
= 12718
= 4
= 0
= 0
= 0
= 0
= 582306
= 0
= 0
= 0
= 118
= 3146
= 432819
= 0
= 0
= 0
= 265
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009