Show Ipv6 Prefixes - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 prefixes

Displays IPv6 prefixes used in router advertisements.
show ipv6 prefixes
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 prefixes
Legend: Flags: A = Autonomous Address Configuration, L = OnLink
Name IPv6 Address/Prefix Length
--------------+----------------------------+----------+----------+-------+---------
vlan 955 212:95:5::/64
vlan 1002 195:35::/64
output definitions
Name
IPv6 Address/Prefix Length
Valid Lifetime
Preferred Lifetime
Flags
Source
OmniSwitch 6250 CLI Reference Guide
Valid
Lifetime
2592000
2592000
The interface name. This is usually the VLAN on which the interface is
configured.
The IPv6 prefix and prefix length for a Router Advertisement Prefix
Option.
Length of time, in seconds, that this prefix will remain valid (i.e., time
until deprecation). A value of 4,294,967,295
Length of time, in seconds, that this prefix will remain preferred (i.e.
time until deprecation). A value of 4,294,967,295
L - Prefix can be used for onlink determination.
A - Prefix can be used for autonomous address configuration (i.e., can
be used to form a local interface address).
config - Prefix has been configured by management.
dynamic - Router Advertisements are using interface prefixes.
November 2009
Preferred
Lifetime Flags Source
604800 LA dynamic
604800 LA dynamic
represents infinity.
represents infinity.
page 30-39