Show Ip Rip Routes - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

RIP Commands

show ip rip routes

Displays the RIP routing database. The routing database contains all of the routes learned through RIP.
show ip rip routes [ip_address ip_mask]
Syntax Definitions
ip_address
ip_mask
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
To view all RIP routes, enter the basic command syntax (show ip rip routes). To view a specific route,
enter the destination IP address and mask.
Examples
-> show ip rip routes
Legends: State: A = Active, H = Holddown, G = Garbage
Destination
------------------+-----------------+----+------+------
2.0.0.0/8
4.0.0.0/8
5.0.0.0/8
10.0.0.0/8
22.0.0.0/8
128.251.40.0/24
150.0.0.0/24
152.0.0.0/24
OmniSwitch 6250 CLI Reference Guide
32-bit IP address.
The mask corresponding to the IP address.
Gateway State Metric Proto
+5.0.0.14 A
4.0.0.7 A
+5.0.0.14 A
2.0.0.14 A
+2.0.0.14 A
4.0.0.7 A
+4.0.0.7 A
5.0.0.14 A
2.0.0.14 A
+5.0.0.14 A
2.0.0.14 A
4.0.0.7 A
+4.0.0.7 A
5.0.0.14 A
2.0.0.14 A
+4.0.0.7 A
5.0.0.14 A
2.0.0.14 A
+4.0.0.7 A
5.0.0.14 A
November 2009
2 Rip
3 Rip
3 Rip
3 Rip
2 Rip
3 Rip
2 Rip
2 Rip
2 Rip
2 Rip
2 Rip
3 Rip
2 Rip
3 Rip
3 Rip
2 Rip
2 Rip
2 Rip
2 Rip
3 Rip
page 33-25