IP Commands
show udp ports
Displays the UDP Listener table. The table shows the local IP addresses and the local port number for
each UDP listener.
show udp ports
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
An IP address of zero (0.0.0.0) indicates that it is listening on all interfaces.
•
This table contains information about the UDP end-points on which a local application is currently
accepting datagrams.
Examples
-> show udp port
Local Address
------------------+--------------
0.0.0.0
0.0.0.0
0.0.0.0
output definitions
Local Address
Local Port
Release History
Release 6.6.1; command was introduced.
Related Commands
show udp statistics
OmniSwitch 6250 CLI Reference Guide
Local Port
67
161
520
Local IP address for this UDP connection.
Local port number for this UDP connection.
Displays UDP errors and statistics.
November 2009
page 29-113