QoS Commands
qos stats interval
Configures how often the switch polls network interfaces for statistics about QoS events.
qos stats interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Change the statistics interval to a smaller interval if you want to monitor QoS events.
•
Change the statistics interval to a larger interval if you want to free some switch memory.
Examples
-> qos stats interval 30
Release History
Release 6.6.1; command was introduced.
Related Commands
show qos statistics
MIB Objects
alaQoSConfigTable
alaQoSConfigStatsInterval
OmniSwitch CLI Reference Guide
The number of seconds before the switch polls network interfaces for
statistics. The range is 10–3600.
default
60
Displays statistics about the QoS configuration.
November 2009
page 38-17