Show Port Mirroring Status - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show port mirroring status

Displays the status of mirrored ports.
show port mirroring status [port_mirror_sessionid]
Syntax Definitions
port_mirror_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If a port mirroring session identifier is not specified with this command, then all port mirroring sessions
are displayed.
Examples
-> show port mirroring status
Session Mirror
Destination
----------+----------+--------------+----------+----------+---------
6. 1/41
----------+----------+--------------+----------+----------+---------
Mirror
Source
----------+----------+--------------+----------+----------+---------
6. 1/20
6. 1/21
6. 1/22
6. 1/23
6. 1/24
6. 1/25
6. 1/26
6. 1/27
6. 1/28
6. 1/29
6. 1/30
output definitions
Session
Mirror Destination
Mirror Direction
Unblocked VLAN
page 34-10
Mirroring session identifier.
Mirror Unblocked
Direction Vlan
- NONE
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
bidirectional -
The port mirroring session identifier.
The location of the mirrored port.
The direction of the mirroring or mirrored port, which can be
bidirectional (the default), inport, or outport.
The mirroring VLAN ID number.
OmniSwitch 6250 CLI Reference Guide
Port Mirroring and Monitoring Commands
Config Oper
Status Status
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
Enable Off
November 2009