Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1252

output definitions
Address
Seen on Interface
Packets Recvd
Last Update
Peer address
Received packets
Received bad packets
Received routes
Received bad routes
Release History
Release 6.6.1; command was introduced.
Related Commands
show ipv6 rip interface
show ipv6 rip routes
MIB Objects
alaRipngPeerTable
alaRipngPeerEntry
alaRipngPeerAddress
alaRipngPeerIndex
alaRipngPeerLastUpdate
alaRipngPeerNumUpdates
alaRipngPeerBadPackets
alaRipngPeerNumRoutes
alaRipngPeerBadRoutes
page 30-86
IPv6 address of the peer.
Interface used to reach the peer.
Number of packets received from the peer.
Number of seconds since the last update was received from the peer.
Peer IPv6 address.
Number of packets received from the peer.
Number of bad packets received from the peer.
Number of RIPng routes received from the peer.
Number of bad RIPng routes received from the peer.
Displays all or specified RIPng interface status.
Displays all or a specific set of routes in RIPng Routing Table.
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009