DHCP Relay Commands
show ip helper dhcp-snooping port
Displays the trust mode and DHCP Snooping violation statistics for all switch ports that are filtered by
DHCP Snooping.
show ip helper dhcp-snooping port
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If DHCP Snooping is operating at the switch level, then information for all switch ports is displayed.
•
If DHCP Snooping is operating at the VLAN level, then information for only those ports that are asso-
ciated with a DHCP Snooping VLAN is displayed.
•
The violation statistics displayed only apply to ports that are in the client only trust mode. When the
trust mode for a port is changed from client-only to trusted or blocked, the violation counters are set
to zero (0).
Examples
-> show ip helper dhcp-snooping port
Slot
Trust
Port
Mode
-----+-------------+----------+----------+----------+----------+---------|---------
1/1
Blocked
1/2
Client-Only
1/3
Client-Only
1/4
Client-Only
1/5
Client-Only
1/6
Blocked
1/7
Client-Only
1/8
Client-Only
1/9
Client-Only
1/10
Trusted
1/11
Trusted
1/12
Trusted
OmniSwitch 6250 CLI Reference Guide
IP Src
Opt82
Filtering Violation
Disabled
0
Enabled
0
Enabled
0
Enabled
0
Enabled
0
Disabled
0
Enabled
0
Enabled
0
Enabled
0
Disabled
0
Disabled
0
Disabled
0
November 2009
MAC
Server
Violation
Violation
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Relay
Binding
Violation Violation
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
page 32-55