Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1226

•
Use this command multiple times with the same access list name to add multiple addresses to the exist-
ing IPv6 access list.
Examples
-> ipv6 access-list access1 address 2001::1/64 action permit
-> ipv6 access-list access1 address 2001::1/64 redist-control aggregate
-> no ipv6 access-list access1 address 2001::1/64
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 access-list
show ipv6 access-list
MIB Objects
alaRouteMapAccessListTable
alaRouteMapAccessListIndex
alaRouteMapAccessListAddress
alaRouteMapAccessListAddressType
alaRouteMapAccessListPrefixLength
alaRouteMapAccessListAction
alaRouteMapAccessListRedistControl
alaRouteMapAccessListRowStatus
page 30-60
Creates an IPv6 access list that is used to specify multiple IPv6
addresses for a route map configuration.
Displays the contents of an IPv6 access list.
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009