Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1197

IPv6 Commands
output definitions (continued)
Minimum RA interval (sec)
RA managed config flag
RA other config flag
RA reachable time (ms)
RA retransmit timer (ms)
RA default lifetime (ms)
Packets received
Packets sent
Bytes received
Bytes sent
Input errors
Output errors
Collisions
Dropped
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 address
ipv6 interface
OmniSwitch 6250 CLI Reference Guide
Minimum time between the transmission of unsolicited router adver-
tisements over the interface (0.33 * Maximum RA Interval).
True/False value in the managed address configuration flag field in
router advertisements.
The True/False value in the other stateful configuration flag field in
router advertisements sent over this interface.
Value placed in the reachable time field in the router advertisements
sent over this interface.
Value placed in the retransmit timer field in router advertisements sent
over this interface.
The value placed in the router lifetime field in the router advertisements
sent over this interface.
Number of IPv6 packets received since the last time the counters were
reset.
Number of IPv6 packets sent since the last time the counters were reset.
Number of bytes of data received since the last time the counters were
reset.
Number of bytes of data sent since the last time the counters were reset.
Number of input errors received since the last time the counters were
reset.
Number of output errors received since the last time the counters were
reset.
Number of collisions since the last time the counters were reset.
Number of packets dropped since the last time the counters were reset.
Configures an IPv6 address on a VLAN.
Configures an IPv6 interface on a VLAN.
November 2009 page 30-31