Udld Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Hide thumbs Also See for OmniSwitch 6250:

Table of Contents

UDLD Commands

udld port

Enables or disables UDLD status on a specific port or a range of ports.

udld port slot/port[-port2] {enable | disable}

Syntax Definitions

enable | disable

Platforms Supported

OmniSwitch 6250-Metro Models

Usage Guidelines

The UDLD protocol must be enabled before using this command.

-> udld port 1/3 enable

-> udld port 1/6-10 enable

-> udld port 2/4 disable

Release History

Release 6.6.1; command was introduced.

OmniSwitch 6250 CLI Reference Guide

The slot number for the module and the physical port number on that

module (e.g., 3/1 specifies port 1 on slot 3).

The last port number in a range of ports that you want to configure on

the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).

Enables UDLD status on a port.

Disables UDLD status on a port.

November 2009