ip router-discovery
Enables or disables the Router Discovery Protocol (RDP) for the switch.
ip router-discovery {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, RDP is disabled on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The ip router-discovery command only activates RDP for the switch. No advertisements occur until
an IP interface is configured with RDP.
Examples
-> ip router-discovery enable
-> ip router-discovery disable
Release History
Release 6.6.1; command was introduced.
Related Commands
ip router-discovery interface
MIB Objects
alaRDPConfig
alaRDPStatus
page 31-2
Enables RDP on the switch.
Disables RDP on the switch.
Enables or disables an RDP interface.
OmniSwitch 6250 CLI Reference Guide
RDP Commands
November 2009