Show Active Policy Rule - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show active policy rule

Displays information about pending and applied policy rules that are active (enabled) on the switch.
show active [bridged | routed | multicast] policy rule [rule_name]
Syntax Definitions
bridged
routed
multicast
rule_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the show policy rule command to display inactive as well as active policy rules.
•
Information for all rules is displayed unless rule_name is specified.
•
Information for all rule types is displayed unless a keyword (bridged, routed, multicast) is specified.
•
Applied rules may or may not be active on the switch. Applied rules are inactive if they have been
administratively disabled with the disable option in the policy rule command.
•
The display may include any of the following characters:
character definition
+ Indicates that the policy rule has been modified or has
been created since the last qos apply.
- Indicates the policy object is pending deletion.
# Indicates that the policy object differs between the pend-
ing/applied objects.
•
A match may show for a rule that is not the highest precedence rule for a particular flow, but only the
rule with the highest precedence is actually applied.
page 39-198
Displays active rules that apply to bridged traffic.
Displays active rules that apply to routed traffic.
Displays active rules that apply to multicast traffic.
The name of the rule for which you want to display information; or a
wildcard sequence of characters for displaying information about rules
with similar names. Use an asterisk (*) to indicate a wildcard character.
OmniSwitch CLI Reference Guide
QoS Policy Commands
November 2009