ipv6 dad-check
Runs a Duplicate Address Detection (DAD) check on an address that was marked as duplicated.
ipv6 dad-check ipv6_address if_name
Syntax Definitions
ipv6_address
ip_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The switch performs DAD check when an interface is attached to the stack and its VLAN first enters the
active state. Use this command to rerun a DAD check on an address that was marked as duplicated.
Examples
-> ipv6 dad-check fe80::2d0:95ff:fe6a:f458/64 Test_Lab
Release History
Release 6.6.1; command was introduced.
Related Commands
N/A
MIB Objects
alaIPv6InterfaceAddressTable
alaIPv6InterfaceAddressDADStatus
page 30-8
IPv6 address.
Name assigned to the interface.
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009