Show Ipv6 Rip Peer - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 rip peer

Displays a summary of the observed RIPng peers, or specific information about a peer when a peer
address is provided.
show ipv6 rip peer [ipv6_addresss]
Syntax Definitions
ipv6_addresss
Defaults
N/A.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a peer, all IPv6 RIP peers are displayed.
Examples
-> show ipv6 peer
Address
-----------------------------+-------------+--------+----------
fe80::200:39ff:fe1f:710c
fe80::2d0:95ff:fe12:da40
fe80::2d0:95ff:fe12:da40
fe80::2d0:95ff:fe6a:5d41
-> show ipv6 rip peer fe80::2d0:95ff:fe12:da40
Peer#1 address
Seen on interface
Last Update
Received packets
Received bad packets
Received routes
Received bad routes
Peer#2 address
Seen on interface
Last Update
Received packets
Received bad packets
Received routes
Received bad routes
OmniSwitch 6250 CLI Reference Guide
IPv6 address of the peer.
Seen on
Interface
vlan172
bkbone20
vlan150
nssa23
= fe80::2d0:95ff:fe12:da40,
= bkbone20,
= 8 secs,
= 33,
= 0
= 5,
= 0
= fe80::2d0:95ff:fe12:da40,
= vlan150,
= 1 secs,
= 27,
= 0
= 2,
= 0
November 2009
Packets Last
Recv Update
23 20
33 2
26 25
20 25
page 30-85