Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1133

IP Commands
output definitions
Dest Addr
Subnet Mask
Gateway Addr
Age
Protocol
Route Count
Release History
Release 6.6.1; command was introduced.
Related Commands
ping
traceroute
show ip route
OmniSwitch 6250 CLI Reference Guide
Destination IP address.
Destination IP address IP subnet mask.
IP address of the gateway from which this address was learned.
Age of the entry. If the entry is less than a day old, it is displayed in
hh/mm/ss format. If it is more than a day old, it is displayed in dd/hh
format (e.g., a route that is 2 days and 12 hours old is displayed as
2d12h).
Protocol by which this IP address was learned (e.g., RIP). NETMGT
indicates a static route. LOCAL indicates a local interface.
The number of routes that appear in the IP Foredoing table for each
protocol type listed.
Used to test whether an IP destination can be reached from the
local switch.
Used to find the path taken by an IP packet from the local switch to
a specified destination.
Displays a list of all routes (static and dynamic) that exist in the IP
router database.
November 2009 page 29-85