Show Ip Router-Discovery Interface - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

RDP Commands

show ip router-discovery interface

Displays the current RDP status, related parameter values, and RDP traffic statistics for one or more
switch router interfaces.
show ip router-discovery interface [name]
Syntax Definitions
name
Defaults
By default, the information for all RDP interfaces is displayed with this command.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
When an optional IP interface name is specified with this command, additional information about the
RDP interface is displayed.
•
Use the show ip router-discovery command to display global RDP status and statistics for the entire
switch.
Examples
-> show ip router-discovery interface
Name
---------------------+--------+--------+------+---------
Marketing
Accounting
output definitions
Name
IP i/f status
RDP i/f status
Next Advt
#Pkts sent/recvd
OmniSwitch 6250 CLI Reference Guide
The IP interface name that was defined at the time the IP interface was
configured.
IP i/f RDP i/f
status status
Disabled Enabled
Disabled Enabled
The user-defined IP interface name defined at the time the IP interface
was configured.
The IP status for this interface (Enabled or Disabled).
The RDP status for this interface (Enabled or Disabled).
Time remaining until the next advertisement is sent.
Number of advertisement packets sent from this interface; the number
of solicitation packets received on this interface.
November 2009
Next #Pkts
Advt sent/recvd
9 0 0
3 0 0
page 31-17