Show Port Mapping - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show port mapping

Displays the configuration of one or more port mapping sessions.
show port mapping [port_mapping_sessionid]
Syntax Definitions
port_mapping_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify the port mapping session ID, then the configuration for all the port mapping sessions
will be displayed.
Examples
-> show port mapping 3
SessionID
-----------+----------------+------------------
8
8
8
output definitions
SessionID
USR-PORT
NETWORK-PORT
Release History
Release 6.6.1; command was introduced.
page 28-10
The port mapping session ID. Valid range is 1 to 8.
USR-PORT NETWORK-PORT
1/2 1/3
1/6
1/7
Displays the port mapping session ID.
Displays the set of user ports of a port mapping session.
Displays the set of network ports of a port mapping session.
OmniSwitch 6250 CLI Reference Guide
Port Mapping Commands
November 2009