Ip Helper Pxe-Support - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ip helper pxe-support

Enables or disables relay agent support for Preboot Execution Environment (PXE) devices.
ip helper pxe-support {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, PXE support is disabled for the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
PXE support was enabled by default in previous releases. Note that PXE is currently disabled by default
and is now a user-configurable option using the ip helper pxe-support command.
Examples
-> ip helper pxe-support enable
-> ip helper pxe-support disable
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip helper
MIB Objects
iphelperPXESupport
page 32-18
Enables PXE support.
Disables PXE support.
Displays current DHCP Relay configuration information.
OmniSwitch 6250 CLI Reference Guide
DHCP Relay Commands
November 2009