Show Ipv6 Redist - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 redist

Displays the IPv6 route map redistribution configuration.
show ipv6 redist [rip]
Syntax Definitions
rip
Defaults
By default all route map redistribution configurations are shown.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Specify a destination protocol with this command to display only those configurations that redistribute
routes into the specified protocol.
•
The IPv6 version of BGP is not supported currently.
Release History
Release 6.6.1; command was introduced.
Examples
-> show ipv6 redist
Source Destination
Protocol Protocol
------------+------------+---------+--------------------
localIPv6 RIPng
output definitions
Source Protocol
Destination Protocol
Status
Route Map
OmniSwitch 6250 CLI Reference Guide
Displays the route map redistribution configurations that specify RIP as
the destination (into) protocol.
Status Route Map
Enabled ipv6rm
The protocol from which the routes are learned.
The protocol into which the source protocol routes are redistributed..
The administrative status (Enabled or Disabled) of the route map
redistribution configuration.
The name of the route map that is applied with this redistribution
configuration.
November 2009 page 30-61