Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1453

QoS Commands
egress
rsvp
balance
nimsg
Defaults
By default basic information messages are logged (info). Error messages are always logged.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to change the type of messages that will be logged or to return
debugging to its default state.
•
Use this command to troubleshoot QoS events on the switch.
Examples
-> debug qos flows queue
-> qos debug no flows no queue
-> debug no qos
Release History
Release 6.6.1; command was introduced.
Related Commands
qos forward log
qos log lines
show qos log
MIB Objects
alaQoSConfigTable
alaQoSConfigDebug
OmniSwitch CLI Reference Guide
Logs information about packets leaving the switch.
Logs information about RSVP flows. Currently not supported.
Logs information about flows that are part of a load balancing cluster.
Not supported for the OmniSwitch 6624/6648.
Logs information about QoS interfaces.
Enables the switch to send events to the PolicyView application in real
time.
Configures the number of lines in the QoS log.
Displays the log of QoS events.
November 2009 page 38-25