Configure The G700; Assigning The Ip Addresses Of The G700 Media Gateway Components - Avaya g700 Installation And Upgrades

Manual installation of a new G700 without an S8300
4. Double-click the file name.
The system displays a File Download window.
5. Click on Save this file to disk.
6. Save the file to the C:\tftp directory (or your alternate tftp location).
7. Use WinZip or another zip file tool to unzip the file, if necessary.

Configure the G700

For a new installation of a G700 Media Gateway, you must complete the following configuration
tasks:
1.

Assigning the IP addresses of the G700 media gateway components

2. Setting up the controller list for the G700
Assigning the IP addresses of the G700 media gateway
components
This section describes how to assign the IP addresses and IP routes to the G700 Media
Gateway and its components. The IP addresses should be available to you on the IP
Addressing Planning Form. The command arguments you will be supplying include:
VLAN — Virtual Local Area Network: a defined network segment that allows users on that
●
segment to have priority services in sharing information with each other.
If the network is not using VLANs, the VLAN should be 1. Otherwise, use the VLAN
numbers indicated in your planning forms. The G700 Media Gateway should be assigned
the same VLAN as the VLAN to which the Ethernet ports are connected. The P330 stack
processor might or might not be assigned to the customer's network management VLAN.
IP address — the unique identifier assigned to an entity on the customer LAN.
●
Netmask — the subnet mask for the customer's LAN segment.
●
Destination — distant networks to which the IP route command needs to send packets.
●
Usually generalized to 0.0.0.0 for networks other than the local segment.
default gateway — the gateway the ip route command specifies to get to the distant
●
networks.
526 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server