Before going to the customer site
Perform the following tasks before going to the customer site:
Planning forms that the project manager provides
●
Getting the serial number of the G700, if necessary
●
Setting up the TFTP server on your laptop or on a customer PC, if necessary
●
Downloading G700 firmware files to your TFTP directory
●
Planning forms that the project manager provides
The project manager should provide you with forms that contain all the information needed to
prepare for this installation. The information primarily consists of:
IP addresses
●
Subnet mask addresses
●
Logins and passwords
●
People to contact
●
The type of system
●
Equipment you need to install
●
Verify that the information provided by the project manager includes all the information
requested in your planning forms.
Tip:
Appendix B: Information
Tip:
gather the installation and upgrade information.
Getting the serial number of the G700,
if necessary
For an upgrade of an existing G700, the existing license file can usually be reused. However, if
the customer is adding feature functionality (for example, adding BRI trunks), or if the upgrade
is between major releases (for example, 1.3 to 2.1), you will need the serial number of the
G700.
on page 689
checklists, provides several checklists to help you
Before going to the customer site
on page 689
on page 690
Issue 8.1 June 2005
on page 690
689