About The Avaya Gateway Installation Wizard - Avaya g700 Installation And Upgrades

Roadmaps and reference information
Upgrade an active LSP (which has taken control of calls because of a problem with the
●
primary controller).
Upgrade the S8300 Media Server acting as the primary controller.
●
Upgrade an S8500 or S8700/S8710 Media Server.
●
Upgrade X330 Expansion modules.
●
Upgrade G600, G650, CMC1, SCC1, or MCC1 Media Gateways.
●

About the Avaya Gateway Installation Wizard

Use the Avaya Gateway Installation Wizard (GIW) to configure a new G350 or G700 Media
Gateway that is controlled by a remote media server but does not have an S8300 installed in
slot V1. The GIW enables you to configure the gateway IP addresses without having to enter
CLI commands. You can also use the GIW to install firmware on the G700 and its components.
Use the GIW to configure a new G700 Media Gateway that is controlled by a remote S8300,
S8500, or S8700/S8710 Media Server and that does not have an S8300 LSP.
Note:
To use the GIW to install firmware on the G700, you must first complete the
Note:
normal pre-installation tasks such as downloading the most recent firmware to a
TFTP server. Also, you cannot use the GIW to configure an X330 Expansion
module.
The GIW can be accessed online at http://support.avaya.com/avayaiw. For more information,
see Job Aid: Avaya Gateway Installation Wizard, 555-245-756.
46 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server