Saving Translations (If Not Using Ia770 And S8300 Is Not An Lsp); Verifying Operation - Avaya g700 Installation And Upgrades

Upgrading an existing S8300A to R3.0 using the Wizards
Note:
Avaya Services personnel only: You may need to use the static craft password
Note:
at this point. The static password will enable you to log in to the S8300 with a
direct connection to the Services port without the ASG challenge/response. To
obtain the static password, call the ASG Conversant number, 800-248-1234 or
720-444-5557, and follow the prompts to get the password. In addition to your
credentials, you will need to enter the customer's Product ID or the FL or IL
number.
Note:
Avaya Business Partners should call 877-295-0099.
Note:

Saving translations (if not using IA770 and S8300 is not an LSP)

Skip this procedure if the S8300 is an LSP, or if IA770 is being used.
!
CAUTION:
If the system is using IA770, do not save translations at this time. Skip to
CAUTION:

Verifying operation

new IA770 software.
To save translations (S8300 is not LSP, and IA770 is not used)
1. In a telnet session, open a SAT session.
2. Log in again as craft.
Note:
If you see the Translation corruption message on the first SAT screen,
Note:
ignore it. Go to
translations later.
3. Type save translation and press Enter.
When the save is finished, the system displays the message,
Command successfully completed.
Verifying operation
To verify operation
1. On the Maintenance Web Interface under Server, click Process Status.
2. Select Summary and Display once and click View.
The View Process Status Results screen displays.
266 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 266. You will save translations after installing the
Verifying operation on page 266. You will need to save