Downloading G700 Firmware Files To Your Tftp Directory; Downloading Individual Firmware Files - Avaya g700 Installation And Upgrades

Downloading G700 firmware files to your TFTP directory

To install new firmware for the G700 processors and the media modules, you first need to move
the new firmware files to a directory on the TFTP server. The installation program reads the new
firmware files from this directory on the TFTP server.
Perform one of the two procedures in this section, depending on whether you have a bundled
tar.gz file on a CD or wish to download individual firmware files from the Avaya Support website.

Downloading individual firmware files

Download the firmware files from the Web to your TFTP directory
Note:
The sequence of links on the website may be somewhat different than described
Note:
here.
1. Access the
2. Navigate to Firmware Downloads for The G700 Media Gateway.
The system displays a list of firmware files.
3. Locate the file names that match the files listed in your planning documentation.
The file names will approximate those listed in
Note:
The latest firmware versions may different from those listed in
Note:
appropriate firmware version may depend on the hardware vintage and/or on the
release of Communication Manager. See Communication Manager Software/
Firmware Compatibility Matrix under Downloads on support.avaya.com.
Table 9: Firmware file formats
Component
P330 Stack Processor
P330 Stack Processor
G700 Media Gateway
VoIP Media Module and
Motherboard VoIP
8-port DCP Media Module
http://www.avaya.com/support
Before going to the customer site
website.
Table 9.
Firmware Version
Format
viisa<version id>
p330<version id>
mgp<version id>
mm760<version id>
mm712<version id>
Table 9. Also, the
Example
viisa4_0_17.exe
p330Tweb.4.0.4.exe
mgp_21_16_0.bin
mm760v43.fdl
mm712v5.fdl
1 of 2
Issue 8.1 June 2005 189