Making the upgrade permanent
!
CAUTION:
You must make the upgrade of the software permanent so that the software is
CAUTION:
recognized and kept on the S8300. If you fail to make software permanent, then
the next time you reboot, old software will become active.
To make the upgrade permanent
1. From the Maintenance Web Interface main menu, under Server Upgrades click Make
Upgrade Permanent.
The S8300 displays the Make Upgrade Permanent window.
2. Click Submit.
When the new S8300 upgrade software is permanent, the S8300 displays the message:
The commit operation completed successfully
Installing post-upgrade Communication Manager
service pack, if any
Note:
Skip this procedure if there is no Communication Manager service pack file to
Note:
install.
This service pack may or may not be call preserving.
Use a telnet session to install the service pack file.
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
3. Log in as craft.
4. Type cd /var/home/ftp/pub and press Enter to access the pub directory.
5. At the prompt, type ls -ltr and press Enter to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory
contains the Communication Manager .tar.gz file you have uploaded, if any.
6. Type update_unpack update.tar.gz, where update is the release or issue number of
the latest software update file. (For example, 00.0.339.4-xxxx.tar.gz). Press Enter.
7. Type update_show and press Enter to list Communication Manager files to verify the new
software update file was unpacked.
Upgrade the S8300
Issue 8.1 June 2005
311