Avaya g700 Installation And Upgrades page 389

Media gateway and media server

Hide thumbs Also See for g700:

Table of Contents

2. In the Service Type field, enter CDR1 for the call accounting link.

change ip-services

3. In the Local Node field, enter the node name for the switch.

In this example, enter procr.

4. The Local Port field defaults to 0 for all client applications.

You cannot make an entry in this field.

5. In the Remote Node field, enter the node name for the adjunct, as administered on the

Node Names screen.

For the call accounting application, type callacctg.

6. In the Remote Port field, enter the TCP listen port assigned to the adjunct.

The recommended value for CDR1 is 5101.

This number must match the port administered on the end device. If you are

using the Downloadable Reliable Session-Layer Protocol tool, this must match

the port administered in the Server application. If you are using a terminal server,

this number must match the Local Port number on the Port Setup menu.

Consult the documentation for your Call Accounting system to determine the

appropriate port for the CDR device.

7. Go to Page 3 and type n in the Reliable Protocol field for the CDR Service Type.

You do not use RSP with a terminal server.

change ip-services

8. Press ENTER to save your changes.

SESSION LAYER TIMERS

Session Connect

Message Cntr

Terminal server installation

Issue 8.1 June 2005

Connectivity