Paging And Announcement Equipment - Avaya g700 Installation And Upgrades

Telephones and adjunct systems

Paging and announcement equipment

This section provides information on loudspeaker paging.
On a G700 or G350 Media Gateway, the loudspeaker paging feature is connected through a
port on an MM711 Analog Media Module. The port is administered on the SAT Station screen,
not the Loudspeaker Paging screen.
The G700 or G350 Media Gateway does not support an auxiliary trunk circuit pack. Therefore,
the loudspeaker feature through an auxiliary trunk is not supported on a G700 or G350 Media
Gateway.
Users on a G700 or G350 Media Gateway controlled by an S8700/S8710 or S8500 can also
access the loudspeaker paging feature if equipment is physically connected to a TN763
auxiliary trunk circuit pack in an PN carrier of an the S8700/S8710 or S8500 system.
Figure 43 shows the connections for loudspeaker paging, dial dictation, or recorded
announcement features on a G700 or G350 Media Gateway.
Figure 43: Typical loudspeaker equipment connections for a G700 or G350 Media Gateway
1
cydfspkKLC 091802
Figure notes:
1. G700 or G350 Media Gateway
2. MM711 Analog Media Module
3. RJ-45 connection
To hook up loudspeaker paging from a G700 or G350 Media Gateway
1. Connect one end of an RJ-45 cable to a port in the MM711 Analog Media Module.
2. Connect the other end of the RJ-45 cable to a customer-supplied telephone hybrid device.
3. Follow the manufacturer's instructions to properly connect the telephone hybrid device to
your loudspeaker paging system.
4. Administer the M711 port on the SAT Station screen as an analog station.
Note:
Do not administer the MM711 port on the SAT Loudspeaker Paging screen.
Note:
418 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
ALM SO EI SM EM SI EO
TST
ACT
SIG
E1/T1
ALM ALM
TST TST
ACT ACT
SHUT DOWN
OK TO
REMOVE
SERVICES USB 1 USB 2 1 2 3 4
ALM
TST
ACT
1 2 3 4
3
EIA 530A DCE
2
5 6 7 8
5 6 7 8
4
4. Telephone hybrid (third party)
device
5. Loudspeaker paging system
5