Avaya g700 Installation And Upgrades page 430

Checklist 3: Task list to manually upgrade an existing G700 with an S8300A (R1.x or
R2.x to R3.0) (continued)
Major Tasks
Upgrading the S8300A
page 589
Upgrade the firmware on the
G700 Media Gateway
page 619
Complete the upgrade process
(S8300 is the primary
controller)
430 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on
on
on page 636
Subtasks
- Install the pre-upgrade service pack
- Linux Migration Backup
- Replace the S8300A
- Remaster and Upgrade the S8300:
- Verify software version
- Copy licence and authentication files to the
S8300
- Disable messaging
- Configure S8300 network parameters
- Verify connectivity to backup server
- Restore backup data
- Verify date and time
- Install post-upgrade service pack, if necessary
- Verify S8300 configuration
- Install license file, if necessary
- Install authentication file, if necessary
- Save translations (if not using IA770)
- Verify operation
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
-Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
- Set Rapid Spanning Tree
If using IA770:
- Install and restart IA770
- Save translations
- Install IA770 service pack, if any
- Install optional language files, if any
- Check media modules
- Enable scheduled maintenance
- Busyout trunks
- Check for translation corruption
- Resolve alarms
- Re-enable alarm origination
- Back up system
- Restart LSPs, if any
2 of 2