Installing a new G700 without an S8300
Associating LSPs with Network Regions
If the primary controller has LSPs, you can associate each LSP with one or more network
regions. In the event of a network failure, IP telephones assigned to a network region will
register with an LSP associated with that region.
This procedure associates up to six LSPs with a network region.
To associate LSPs with a network region
1. On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 2
change ip-network-region 1
INTER-GATEWAY ALTERNATE ROUTING
Incomming LDN Extension:
Conversion to Full Public Number - Delete:
Maximum Number of Trunks to Use:
LSP NAMES IN PRIORITY ORDER
1
node-10-LSP_____
2
________________
3
________________
4
________________
5
________________
6
________________
2. Enter the names of up to six LSPs to be associated with region 1.
The LSP names must be the same as administered on the Node Names screen.
3. Submit the form.
4. Repeat for each network region with which you want to associate LSPs.
Administering IP Interfaces
This procedure assigns network region 1, as an example, to the S8300 media server.
To assign the network region to the S8300
1. At the SAT prompt, type change ip-interfaces procr.
The S8300 displays the IP Interfaces screen for the media server.
196 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
IP NETWORK REGION
Insert:
SECURITY PROCEDURES
1
challenge
2
3
4
5
6
Page
2 of
19