Install New Firmware On The G700; Manual Upgrade Procedures - G700 Firmware; Verifying The Contents Of The Tftpboot Directory - Avaya g700 Installation And Upgrades

4. Click on All Documents.
5. Select the appropriate document for the expansion module you are installing.

Install New Firmware on the G700

This section describes the manual procedures to install firmware on the G700 Media Gateway
processors and media modules.
Manual upgrade procedures — G700 firmware
This section contains the following tasks:

Verifying the Contents of the tftpboot Directory

Determining which firmware to install on the G700
Installing New Firmware on the P330 Stack Processor
Installing new firmware on the G700 Media Gateway Processor
Installing new firmware on the media modules
Installing IA770 service pack files, if any
Verifying the Contents of the tftpboot Directory
Before proceeding with the G700 firmware installation, you should check the /tftpboot directory
on the TFTP server to make sure the firmware versions match those listed in the planning
documentation. If they do not, you must copy the correct firmware versions into the /tftpboot
directory using the following procedure:
1. Download the firmware files from the support Website to your laptop.
2. Using the Web Interface on the S8300 Media Server, copy the firmware files from your
laptop to the /var/home/ftp/pub directory on the S8300, or
Alternatively, you can "ftp" the files from your laptop to the pub directory.
3. Copy the firmware files from the pub directory to the /tftpboot directory, using the S8300
Media Server command line interface.
To copy firmware files to the /tftpboot directory of an S8300 Media Server, do the following:
a. Use telnet, Avaya Site Administration, or another tool to access the S8300 Media Server
command line.
b. Log in as craft.
Install New Firmware on the G700
Issue 8.1 June 2005 485