Pre-Upgrade Tasks - If The S8300 Is The Primary Controller - Avaya g700 Installation And Upgrades

Upgrading an existing S8300A to R3.0 using the Wizards
3. Check the Reports as: field for the release number of the S8300 software.
In this example, the release number is reported as R011x.02.0.524.0. This corresponds to
release 1.2.0.
whether or not a pre-upgrade update is required.
Pre-Upgrade Tasks — If the S8300 is the primary controller
Skip to Upgrading the S8300A
!
CAUTION:
If you are upgrading an S8300 primary controller that has LSPs registered to it,
CAUTION:
the LSPs must be upgraded before the primary controller. (You can use the SAT
command, list media-gateway, to see if there are LSPs registered to the S8300.)
Perform the following procedures if you are upgrading an S8300 that is configured as a primary
controller:
To clear alarms
●
To check link status
●
To record all busyouts
●
226 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Table 13 maps the release number to the Reports as: field, and specifies
Table 13: Software Release Numbers
Release Number
Reported as
From:
R011x.01.0.xxx
To:
R011x.01.9.xxx
From:
R011x.02.0.xxx
To:
R011x.03.0.xxx
From:
R011x.03.1.xxx
To:
R011x.03.9.xxx
From:
R012x.00.0.xxx
To:
R012x.00.9.xxx
on page 237, if the S8300 is configured as an LSP.
Release Pre-upgrade
Number update
Required?
1.1.0 to No
1.1.9
1.2.0 to Yes
1.3.0
1.3.1 to No
1.3.9
2.0.0 to No
2.0.9