Important P333T-Pwr Switch Safety Instructions; Using The P333T-Pwr Switch - Avaya g700 Installation And Upgrades

Important P333T-PWR switch safety instructions

Please read the following helpful tips. Retain these tips for later use.
When using this switch, the following safety precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons:
Read and understand all instructions.
●
Follow all warnings and instructions marked on this switch.
●
This product can be hazardous if immersed in water.
●
To avoid the possibility of electrical shock, do not use it near water.
The Avaya P333T-PWR switch and modules contain components sensitive to electrostatic
●
discharge.
Do not touch the circuit boards unless instructed to do so.
This product should be operated only from the type of AC (and optional DC) power source
●
indicated on the label.
If you are not sure of the type of AC power being provided, contact a qualified service
●
person.
Do not allow anything to rest on the power cord.
●
Do not locate this product where the cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords as this can result in the risk of line or
●
electric shock.
Disconnect the cords on this product and refer servicing to qualified service personnel
●
under the following conditions:
- The power supply cord or plug is damaged or frayed
- Liquid has been spilled into it
- Exposed to rain or water
- Dropped or the housing has been damaged
- Exhibits a distinct change in performance
- Operates abnormally when following the operating instructions

Using the P333T-PWR switch

The P333T-PWR Power over Ethernet Stackable Switch can be used to power 46xx series IP
telephones in addition to providing a 10/100 megabits per second Ethernet connection. The
switch can form part of a stack with the G700 Media Gateway or members of the P330
stackable switching system.
Installation and wiring of telephones and power supplies
Issue 8.1 June 2005 357