Avaya g700 Installation And Upgrades page 278

Upgrading an existing S8300A to R3.0 using the Wizards
To re-enable alarm origination
1. Telnet to the S8300 and log on.
2. At the command prompt, type almenable -d b -s y
where
-d b sets the dialout option to both (numbers)
-s y enables SNMP alarm origination
3. Type almenable (without any options) to verify the alarm origination status.
To back up the system
Using the Maintenance Web Interface, back up the system as you did before the upgrade
selecting Save Translations and all backup sets.
To restart LSPs (if any)
To restart Communication Manager on LSPs (if any) after the upgrade:
1. Open a Telnet session on the S8300 (LSP).
2. At the command prompt, type start -ac and press Enter.
This completes the upgrade process for a G700 with an S8300.
278 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server