Post-Upgrade Tasks; Installing Ia770 Service Pack (Or Rfu) Files, If Any - Avaya g700 Installation And Upgrades

4. To set the rapid spanning tree version, type set spantree version
rapid-spanning-tree and press Enter.
The 802.1w standard defines differently the default path cost for a port compared to STP
(802.1d). In order to avoid network topology change when migrating to RSTP, the STP path
cost is preserved when changing the spanning tree version to RSTP. You can use the
default RSTP port cost by typing the CLI command set port spantree cost auto.
Note:
Avaya P330 Stack Processors now support a "Faststart" or "Portfast" function,
Note:
because the 802.1w standard defined it. An edge port is a port that goes to a
device that cannot form a network loop.
To set an edge-port, type set port edge admin state module/port
edgeport.
For more information on the Spanning Tree CLI commands, see the Avaya P330T User's Guide
(available at http://www.avaya.com/support).

Post-upgrade tasks

After the upgrade is complete, perform the following post-upgrade tasks:

Installing IA770 service pack (or RFU) files, if any

Completing the upgrade process (S8300 is the primary controller)
Installing IA770 service pack (or RFU) files, if any
If IA770 is being used, a post-upgrade service pack for IA770 may be required. See the IA770
documentation for procedures to install a service pack. The service pack file and documentation
can be found on the Avaya Support Web Site at http://support.avaya.com.
To obtain the post-upgrade service pack file and documentation
1. On the Avaya Support Web site, click on Find Documentation and Downloads by
Product Name.
2. Under the letter "I", select IA 770 INTUITY AUDIX Messaging Application.
3. Click on Downloads.
To download the IA770 patch software:
4. Click on IA 770 INTUITY AUDIX Embedded Messaging Application Patches.
on page 319
on page 320
Issue 8.1 June 2005
Post-upgrade tasks
319