Connecting Using The Customer's Lan; Before Going To The Customer Site - Avaya g700 Installation And Upgrades

Connecting using the customer's LAN

If you can connect to the customer's LAN, you can:
1. Install the S8300 software by:
- Opening the Web interface on the S8300 and using the Avaya Installation Wizard
or,
- Opening the Web interface on the S8300 and using the main menu
2. Upgrade the G700 firmware by:
- Opening the Web interface on the primary server and using the Avaya Installation Wizard
or Upgrade Tool
or,
- Opening a telnet session to the P330 stack processor and perform the installation
commands
Note:
For LAN connections, the TFTP server can be your laptop or a customer
Note:
computer on the LAN.
See About connection and login methods
and log into the G700.

Before Going to the Customer Site

The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
Perform the following pre-installation tasks:
Upgrading to release 3.0 (Install TFTP server or obtain USB CD-ROM drive)
Collecting Upgrade Information
Obtaining service pack files, if needed
If using IA770, obtaining service pack and language files
Completing the RFA process (Obtaining license and password file)
Before Going to the Customer Site
on page 47 for details on how physically to connect
Issue 8.1 June 2005 439