Avaya g700 Installation And Upgrades page 175

6. Press F3 (Enter) to save your changes.
If properly administered, the G700 should register with the primary controller within 1–2
minutes. The IP Address, MAC Address, and Module Type fields are populated
automatically after the G700 media gateway registers with the server.
7. Type change media-gateway to view the Media Gateway screen.
Media Gateway screen (after registration with primary controller)
change media-gateway 1
Number: 1
Type: g700
Name: Swainsons
Serial No: 012X06230551
Network Region: 1
Registered? y
Slot Module Type
V1: S8300
V2: MM712
V3: MM711
V4: MM710
V8:
V9:
The media modules installed in the G700 are listed next to their slot numbers. Verify that a
G700 media gateway has been successfully added.
To verify changes
1. At the SAT prompt, type list media-gateway.
Media-Gateway Report screen
list media-gateway
Number Name
Reg?
1 LabA
2 Data MG2
MEDIA GATEWAY
FW Version/HW Vintage: 21.13.0 /0
Controller IP Address: 135.9.41.146
Name
ICC MM
DCP MM
ANA MM
T1/E1 MM
MEDIA-GATEWAY REPORT
Serial No/ IP Address/
FW Ver/HW Vint Cntrl IP Addr
01DR07128730 135.177.49.57
21 .13 .0 /0 135.177.49.59
02DR01130356 135.177.49.90
11 .2 .0 /0 135.177.49.40
Administer Communication Manager
Page
IP Address: 135.9.41.150
MAC Address: 00:04:0d:02:06:ca
Encrypt Link? y
Location: 1
Site Data:
Type
g700
g350
Issue 8.1 June 2005
1 of 1
NetRgn
1 y
1 n
175