Avaya g700 Installation And Upgrades page 118

Checklist 2: Install a New G700 without an S8300 (continued)
Major Task
Collecting Installation
Information
Configure the G700
page 190
Install firmware on the G700
and media modules
page 191
Administer Communication
Manager
Complete the Installation
Process
118 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 187
on
on
on page 193
on page 209
Subtasks
- Obtaining planning forms
- Getting the Serial Number of the G700,
if Necessary
- Installing the Gateway Installation Wizard
- Setting Up the TFTP Server
- Downloading G700 firmware files to your
TFTP directory
- Assign IP addresses to the G700 processors
- Set up IP routing for the stack
- Set up default IP route for the G700
- Check IP connections
- Set up controller list for the G700
- Configure X330 Expansion Module, if
necessary
- Install firmware on the P330 Stack Processor
- Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
-Set Rapid Spanning Tree
- Reboot the system
- Assign node names, if necessary
- Administer network regions
- Assign LSPs to network regions
- Administer IP interfaces
- Administer the LSP form
- Add media gateway
- Verify changes
- Enable announcements, if necessary
- Save translations
- Check planning documentation
- Connect and administer test endpoints
- Complete electrical installation
- Enable adjunct systems
2 of 2