Connecting The P333T-Pwr Switch - Avaya g700 Installation And Upgrades

Telephones and adjunct systems
!
CAUTION:
The Avaya P333T-PWR switch does not contain any user-serviceable
CAUTION:
components inside. Do not open the case.
!
CAUTION:
The P333T-PWR switch can be used only indoors and in a controlled
CAUTION:
environment.
The P333T-PWR switch has 24, 10/100 Base-T ports, each of which can supply up to 16.5
watts using the internal power supply and operates on a 100–240 volts AC, 5.3 amperes, 50/60
hertz power source with the option of using the 44~57 volts DC, 15 amperes to boost the inline
power.
The P333T-PWR switch can be placed in a wiring closet or on a flat, stable surface like a desk.
Screws are provided for mounting in a standard 19-inch rack.

Connecting the P333T-PWR switch

To power up—AC input
1. Insert the power cord into the power connector (BUPS or AC Power Supply) on the rear of
the unit. See
Figure 30: Connectors on the P333T-PWR switch
Figure notes:
1. BUPS connector
2. Insert the other end of the power cord into a non-switched electrical outlet or the connector
on the BUPS.
The unit powers up and performs a self-test procedure. The LEDs flash at regular intervals
after the self-test procedure is completed successfully.
358 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Figure 30: Connectors on the P333T-PWR switch
1
BUPS
INPUT
2. AC connector
2
INPUT
44-57V Amax 15A
Vin
on page 358.
scdlp333 KLC 082002