Avaya g700 Installation And Upgrades page 115

For help with connecting to and logging in to the G700 or S8300, see
methods on page 54.
Checklist 1: Install New G700 with an S8300 (Primary or LSP)
Major Tasks
Installation Overview
page 126
Before Going to the Customer
Site on page 130
Hardware installation for the
G700 Media Gateway and
S8300 Media Server
Install the S8300
Configure the S8300 (See
the Avaya Installation Wizard
(IW) on page 148
Subtasks
on - G700 components
- Software and firmware files
- Access to the Server CD
- Access to the S8300 and G700
- Install TFTP Server or Obtain USB CD Drive
- Get planning forms
- Get the G700 serial number
- Check FTP server for backups
- Obtain service pack files, if needed
- If using IA770, obtain service pack and
language files,
- If using IA770, obtain Ethernet interface IP
address and Subnet mask
- Complete the RFA process
- Obtain static craft password
- On site checklist
- Unpack and check the order
on page 75 - Install the G700
- Cable multiple units
- Attach ground conductors
on page 137 - Insert the S8300
- Remaster the hard drive and install new CM
software, and IA770 software, if necessary
-Using the Avaya Installation Wizard (IW)
page 148:
Using - Set server identities
- Configure Stack Master/IP routes
- Configure optional services:
- Load Security files
- Install CM software
--Upload translations, if necessary
About the Installation Roadmap and Task Lists
if needed
--Set time, date, and time zone
--Import EPW
--Set usage option
UPS
DNS
NTP
INADS
About connection
on
1 of 3
Issue 8.1 June 2005 115