If using IA770:
Install and restart IA770
To install and restart IA770
1. Telnet to 192.11.13.6
2. Log in as craft or dadmin.
3. Type cd /usr/CHIA
4. Install IA770:
a. Type sudo ./autoinstall
b. When prompted to stop call processing, select y.
The installation should take about 10 minutes from this point.
Note:
Communication Manager will shutdown.
Note:
c. Ensure that the autoinstall script completed successfully.
You will see the message,
Successful Completion of IA770 Automatic Installation.
5. Enable messaging:
a. Go to the Web Interface and select Messaging Software under Miscellaneous.
b. If the Enable button shows at the bottom of the screen, click it to enable messaging.
If the Disable button is showing, messaging is already enabled.
Note:
This does not start messaging. Communication Manager and Messaging are still
Note:
stopped at this point.
6. Restore AUDIX data:
a. Under Data Backup/Restore, click View/Restore Data.
The View/Restore Data screen displays.
Post-upgrade tasks
Issue 8.1 June 2005
629