Restoring Data; Procedure One: Restoring Data Backup (If Upgrading From A Pre-1.2 Release) - Avaya g700 Installation And Upgrades

Restoring data

In this section you will restore the system data that you backed up. Do only one of the following
two procedures, depending on how you backed up the data:

Procedure One: Restoring data backup (if upgrading from a Pre-1.2 release)

●
Procedure Two: Restoring data backup (If upgrading from R1.2.x through 2.x)
●
Note:
The backup and restore processes use the ping service to check connectivity to
Note:
the backup server. If a backup or restore operation fails, ensure that the ping
service is enabled:
a. On the Maintenance Web Interface, under Security, select Firewall.
b. In the Service column, find ping.
c. The checkboxes for both Input to Server and Output from Server should be
checked.
Procedure One: Restoring data backup
(if upgrading from a Pre-1.2 release)
Do these tasks only if you have upgraded from a pre-1.2 release.
To restore translations from a pre-1.2 release:
1. Select View/Restore Data under Data Backup/Restore.
2. Select FTP and enter the information for the FTP backup server.
Click View.
3. Select the Communication Manager translations backup set to restore (filename begins with
"xln".
Click Restore.
!
Important:
Do not restore the system or security backup sets (filenames beginning with "os"
Important:
and "security"). If you backed up the AUDIX data, you will need to restore the
AUDIX backup sets as separate steps. The AUDIX translations, names, and
messages backup set filename begins with "audix-tr-name-msg". The AUDIX
announcement backup set filename begins with "audix-ann".
Upgrading the S8300A
on page 257
on page 258
Issue 8.1 June 2005 257