Administering An S8500 Or S8700 Primary Controller - Avaya g700 Installation And Upgrades

LSP Screen
change lsp
Number NAME
1 node-10-LSP_
2 ____________
3 ____________
4 ____________
5 ____________
6 ____________
7 ____________
8 ____________
9 ____________
10 ____________
11 ____________
12 ____________
13 ____________
14 ____________
15 ____________
16 ____________
2. Enter the node name for each LSP supported by the primary controller and submit the form.
Skip to Administering the Media Gateway

Administering an S8500 or S8700 primary controller

In this case, the S8300 you have installed is configured as an LSP.
!
CAUTION:
This administration applies only to the primary controller that controls the S8300
CAUTION:
LSP that you are installing. The primary controller can be an S8500 or S8700
media server. Do not administer the S8300 LSP. Translations are automatically
copied to the LSP from the primary controller.
Skip this section and go to
primary controller is an S8300.
Note:
Some of the procedures in this section may have been completed previously as
Note:
part of a normal media server installation.
LOCAL SURVIVABLE PROCESSOR
IP Address
192.168.1.50
on page 506.
Administering an S8300 primary controller
Administer Communication Manager
Page
Service Translations
State? Updated
in-service 14:21 5/4/2003
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
on page 494 if the
Issue 8.1 June 2005
1 of 16
499