Avaya g700 Installation And Upgrades page 598
Media gateway and media server
Hide thumbs
Also See for g700:
- Installing and upgrading (808 pages) ,
- Installing manual (768 pages) ,
- Installation manual (494 pages)
Table of Contents
Advertisement
Upgrade of an existing S8300A to R3.0 with manual upgrade of G700 firmware
To begin the upgrade
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
The first RP screen should display.
NOTE: If you get the login prompt instead of the RP screen
If the telnet login prompt appears instead of the RP screen, the hard drive contains
a Communication Manager software release. In this case, if you have a USB
CD-ROM drive, connect the drive to a USB port on the S8300 and insert the unity
CD. Then log in to the telnet session (using the initial craft login) and use the
Shutdown Server feature on the Maintenance Web Interface to reboot the system.
After the reboot completes, telnet to 192.11.13.6 and the RP screen should now be
displayed.
If you do not have the USB CD-ROM, you cannot proceed with the upgrade
procedure described in this chapter. However, you can upgrade the Communication
Manger software using the procedure described in
existing S8300B to R3.0 with manual upgrade of G700 firmware
this chapter.
To upgrade using the procedure in
S8300B to R3.0 with manual upgrade of G700 firmware
1. Complete the procedures starting at
pack
page 670. Note that you must have a copy of the license and authentication files
on your laptop and install them before doing the upgrade.
2. Return to this chapter and complete the procedures starting with
software version
3. Complete all the remaining procedures except installation of the license and
authentication files, which was done in step 1.
Alternatively, you can obtain a USB CD-ROM drive or an S8300B with only the RP
software and proceed from
software
598 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 658 and ending with
on page 251, using the initial craft login.
Remastering the hard drive and installing the upgrade
on page 245.
Chapter 12: Upgrade of an
Chapter 12: Upgrade of an existing
Installing the pre-upgrade software service
Making the upgrade permanent
and then return to
on
Verifying
Advertisement
Table of Contents
