Avaya g700 Installation And Upgrades page 201

IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
2. Complete the fields as described in ''Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.''
Note:
It is strongly recommended to use the defaults in the screen. However, for the
Note:
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. If the network region of the G700 (1 in this example) is different from that of the S8500 or
S8700 CLAN board(s), you must interconnect the two regions.
Press NextPage twice to display page 3, of the Inter Network Region Connection
Management screen.
This screen shows the source region (1) and the first 15 destination network region
numbers. (Pages 4–19 show destination regions 16–250).
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
Administer Communication Manager
Page 1 of
RSVP Enabled? n
Issue 8.1 June 2005
19
201